![]() ![]() You could stain the wood or leave as is.Īnother important step is to measure the bracing to attach the rod holders to the wood. Then, lightly sand the dowel with #220 grit sandpaper and wipe clean with a cloth. Then, depending on your rod holders, you will subtract 1/8″-1/4″. Measure the distance from the rod bracing to the organizer ( three in total). Finally, measure the distance of each shelf ( remember, each piece could be different) and cut and install the same way.Then, nail the trim into place just like the first trim piece. Measure the sides of the organizer ( each one could be different) and cut the trim at those measurements.Continue this process for the length of the board. Move about 8″ and place another nail, adjust the trim piece if needed to make it flush with the shelf. ![]() Place the trim against the shelf, the top will be flush, then starting on one end nail the trim piece into place with 1-1/4″ finishing nails. Cut one trim piece the length of the top shelf. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |